-APEXi POWER INTAKE REPLACEMENT FILTERS.
-APEXi POWER INTAKE PANEL FILTER.
-APEXi POWER INTAKE KITS.
-APEXi SUPER SUCTION KITS.
The Power
Intake is the premier air filter designed to create pure horsepower.
The
intake funnels used in racing machines take advantage of a characteristic where
air travels along the side of the side of surfaces. However, the center portion
of the funnel is virtually unused. It is this concept that gave birth to the
Dual Funnel design. A primary funnel on the top portion of the air cleaner was
inserted to channel the air flow directly into the lower funnels at the base of
the cleaner. This design was a huge success on the former Super Intake model.
The Power Intake took this design and improved the flow characteristics.
New
funnel design, element material and air flow channeling characteristics make the
Power Intake one of the most efficient air cleaners on the market today. By
constructing the upper and lower funnel from a highly durable injected resin,
engineers were able to construct the ideal shaped funnel previously not possible
with the stainless steel material. Funnel shapes focused on increasing air speed
without changing the flow direction of the intake air. The result is a high
speed and smooth flow of air into the intake. The lower funnel has been
engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel
position has been made even closer to the base of the cleaner to reduce drag and
eliminate any "dead spots" within the cleaner. The Power Intake incorporates a
newly developed material (layer filter of dry density fibers) which improves the
element density. This allows maximum protection from foreign materials entering
the engine.
Compared with past model, the Power Intake has also succeeded in
decreasing its ventilation resistance by about 10% (pressure loss) for maximum
performance and protection.
The Power Intake is dry-type filter and is
trouble free. Some of the problems associated with wet type cleaners, such as
oil sticking to the air flow meter, are a thing of the past.
The Power
Intake is basically maintenance free.
Filter replacement, when necessary,
can be done at a very low cost.
| APEXi POWER INTAKE REPLACEMENT FILTER - 500-A021 |  | |||
Comes with filter, gaskets & bolts. Suits: Silvia-180SX-S13-S14-S15 SR20DET Q45 AFM Pulsar GTiR RNN14 SR20DET Supra MKIII-MA70-JZA70 Supra MKIV JZA80 Celica - ST205 Mark II JZX81-JZX90-JZX100 Cresta/Chaser - JZX90-JZX100 Soarer JZZ30 Aristo JZS147-JZS161 WRX Imprezza (98-00) GC8/GF8 Forester (09/98-02/02) SF5 EVO 1-2-3-4-5-6-7-8 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$120.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE REPLACEMENT FILTER - 500-A022 | .JPG) | |||
Comes with filter, gaskets and bolts. Suits: 300ZX Z32 Skyline R32 GTS(T)-R33 GTS(T)-R34 GT(T) Stagea C34 (96-00) Cefiro A31/Laurel C33 Silvia/180SX / S13 CA18DE-SR20DET MR2 - SW20 Mark II - JZX110 WRX Imprezza (92-96) GC8/GF8 WRX Imprezza (00-02) GDA/GDB Forester (02/97-09/98) SF5 Forester (02/02-) SG5 RX7 (04/89-12/91) FC3S CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$100.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE REPLACEMENT FILTER - 500-A024 | .JPG) | |||
Comes with filter, gaskets and bolts. Suits: Skyline GTR R32-R33-R34 RB26DETT Stagea WGNC34 4WD 260RS RB26DETT RX7 (12/91-01/99) FD3S CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$100.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - NISSAN | .JPG) | |||
| Comes with filter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-N002-Skyline R32 GTST RB20DET-AU$180.00 507-N003-180SX/S13 CA18DET (04/89-01/91)-AU$280.00 507-N004-180SX/S13 SR20DET (01/91-10/93)-AU$280.00 507-N005-Sivia S14/S15 SR20DET-AU$280.00 507-N006-Skyline R33 GTST/R34 GTT/STAGEA WGC34/WGNC34 RB25DET-AU$180.00 507-N009-300ZX Z32 CZ32/GCZ32 VG30DETT (07/89-08/00)-AU$180.00 507-N010-Pulsar GTi-R RNN14 SR20DET (08/90-01/95)-AU$280.00 508-N003-NA Silvia S14/S15 Non Turbo SR20DE-AU$250.00 508-N005-NA Skyline R33 GTS Non Turbo RB25DE (08/93-05/98)-AU$180.00 508-N020-NA Z33 Non Turbo VQ35DE (07/02-)-AU$280.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$180.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - GTR/STAGEA 260RS |  | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-N001-R32 GTR RB26DETT (Includes 2 Filters)-AU$420.00 507-N011-R33 GTR RB26DETT (Includes 2 Filters)-AU$420.00 507-N011-R34 GTR RB26DETT (Includes 2 Filters)-AU$420.00 507-N011-STAGEA 260RS RB26DETT (Includes 2 Filters)-AU$420.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$420.00 (+ postage: $30.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - TOYOTA | .JPG) | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-T003-Supra JZA70-AU$280.00 507-T004-JZA80 2JZ-GTE (05/93-08/97)-AU$280.00 507-T005-Soarer JZZ30 1JZGTE (05/91-08/96)-AU$280.00 507-T006-Chaser/Cresta/Mark II JZX90-AU$250.00 507-T007-SW20 MR2 3S-GTE (10/89-10/93)-AU$280.00 507-T008-SW20 MR2 (10/93-10/99)-AU$280.00 507-T011-Celica ST205-AU$320.00 507-T012-Chaser/Cresta/Mark II JZX81-AU$250.00 507-T014-Chaser/Cresta JZX100-AU$240.00 507-T016-Mark II JZX110-AU$310.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$210.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - TOYOTA NA | .JPG) | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 508-T003-NA Tueno AE86 (05/83-05/87)-AU$260.00 508-T004-NA Supra JZA80 2JZ-GE (05/93-08/97) (VVTi Not Suitable)-AU$260.00 508-T008-NA MR2 SW20 3S-GE (10/89-10/93)-AU$260.00 508-T009-NA MR2 SW20 3S-GE (10/93-12/97)-AU$260.00 508-T016-NA Altezza SXE10 3S-GE-AU$310.00 508-T024-NA MRS ZZW30 1ZZ-FE-AU$320.00 508-T029-NA Corolla ZZE123-AU$240.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$260.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE KIT - SUBARU | .JPG) | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-F005-Forester SF5 (02/98-02/2)-AU$160.00 507-F002-Legacy BD5/BG5 (10/93-12/98)-AU$140.00 507-F003-WRX Impreza GC8 EJ20 (09/96-08/00)-AU$140.00 507-F003-Legacy BD5/BG5 (96/6-98/12) - BE5/BH5 (06/98-05/01)-AU$140.00 507-F004-WRX Impreza GDA EJ20 (09/00-10/02)-AU$230.00 507-F004-Legacy BE5/BH5 (05/01-06/03)-AU$230.00 507-F004-Forester SF5 (02/02+)-AU$230.00 507-F006-Legacy BP5/BL5 (06/03+)-AU$190.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$140.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - MISUBISHI | .JPG) | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-M001-EVO 1-2-3 CD9A,CE9A 4G63 (10/92-08/96)-AU$260.00 507-M003-EVO 4-5-6 CN9A,CP9A 4G63 (08/96-02/01)-AU$260.00 507-M005-EVO 7-8 CT9A 4G63 (02/01+)-AU$260.00 508-M001-NA FTO DE3A 6A12 (10/94-07/00) (GPX MIVEC Engine)-AU$260.00 508-M002-NA FTO DE3A/DE2A 6A12/4 G93 (10/94-07/00)-AU$260.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$260.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - HONDA | .JPG) | |||
| Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 508-H001-CR-X EG1/EG2-AU$300.00 508-H001-Civic EG4/EG6/EG8/EG9-AU$300.00 508-H002-Prelude BB1,BB4,BA8,BA9, HA22A/F22B (09/92-11/96)-AU$260.00 508-H003-Accord CD5 K20A (09/93-09/97)-AU$260.00 508-H004-Integra Type R DC2/DB8-AU$260.00 508-H005-Civic Type R EK4/EK9-AU$260.00 508-H013-Civic Type R EP3-AU$300.00 508-H013-Integra Type R DC5-AU$300.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$260.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE COMPLETE KIT - MAZDA | .JPG) | |||
Comes with fillter, gasket(s), bracket(s), adaptor(s) and bolts. Everything required to replace the factory air box. Available for: 507-Z002-RX7 FC3S/FC3C 13BT (04/89-12/91)-AU$260.00 507-Z001-RX7 FD3S (Includes 2 Filters)-AU$420.00 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$260.00 (+ postage: $20.00) | ||||
| APEXi POWER INTAKE PANEL FILTER |  | |||
Apexi Power Intake Panel filter is a high performance replacement for your genuine air filter. This is a direct replacement for your stock air filter and you can retain the stock air box. The high flow filter by Apexi will improve throttle response and are maintainance free for up to 25,000 kms. Available for: 503-N101 - Nissan - Skyline R31 GTS-X - HR31 - Skyline R31 GTS-R - HR31 - Skyline R32 GTS(T)-R33 GTS(T)-R34GT(T) - Skyline R32 GTR-R33 GTR-R34 GTR - Skyline V35 250GT - V35 - Skyline V35 250GT FOUR - NV35 - Skyline V35 300GT - HV35 - Skyline V35 350GT-8 - PV35 - Skyline V35 350GT - CPV35 - 180SX RS13 CA18DE(T) - 180SX RPS13 S2 (Red & Black top) - Silvia S13 CA18DE(T) - Silvia S14 SR20DE(T) - Silvia S15 SR20DE(T) - Pulsar GTiR - RNN14 SR20DE(T) - Fairlady 300ZX Z32 - Stagea WGC34 (96-00) 503-N101 - Subaru - WRX Imprezza GC8/GF8 Ver1-2 - WRX Imprezza GC8/GF8 Ver3-4 - WRX Imprezza GC8/GF8 Ver5-6 - WRX Imprezza GDB - Legacy BG5 503-H101 - Honda - Odyssey RA6 - Civic EK4 - EK9 - EK3 503-M101 - Mitsubishi - EVO 1-2-3-4-5-6-7-8-9 503-T101 - Toyota - MR2 - AW11 - Supra MKIII - MA70 503-T102 - Toyota - CELICA 3S-GTE ST185(H) 503-T103 - Toyota - Supra JZA80 S1 503-T106 - Toyota - Celica ST205 - ST202 - ST203 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$110.00 (+ postage: $20.00) | ||||
| APEXi SUPER SUCTION KIT - FACTORY AFM - NISSAN |  | |||
The Super Suction kit from APEXi reduces the suction resistance from the air filter to the turbocharger. This suction reduction also maximize turbine efficiency 100% and from the filter intake is maximized with optimum piping diameter & smooth & tapered curves. This design increases the air intake breathing capabilities dramatically. In addition, the aluminium molded piping will not deformed at high boost levels (where a huge air vacuum occured inside the air intake piping) as compared to the stock rubber intake piping. The Super Suction Kit is an intake adapter kit for hardcore enthusiasts wishing to convert their fuel injection system to D-Jetro (Pressure sensor type) or switch airflow meters with a higher capacity version from a different vehicle. This allows tuners to transcend the limitations of the factory fuel injection system and unleash the true power potential of their modified engine. The kit comes with a replacement intake pipe, filter, and all necessary hardware. Available for: 538-N010 - Nissan PS13/RPS13 SR20DET (01/91-01/99) - Silvia PS13 (Red Top) - 180SX RPS13 (Red & black top) 538-N020 - Nissan S14/CS14/S15 SR20DET (93/10-) - Silvia S14 - Silvia S15 538-N030 - Nissan HCR32/HNR32 RB20DET (05/89-08/93) - Skyline R32 GTST 538-N040 - Nissan ECR33 RB25DET (08/93/8-05/98) - Skyline R33 GTST CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$570.00 (+ postage: $40.00) | ||||
| APEXi SUPER SUCTION KIT- FACTORY AFM - MITSUBISHI | .jpg) | |||
The Super Suction kit from APEXi reduces the suction resistance from the air filter to the turbocharger. This suction reduction also maximize turbine efficiency 100% and from the filter intake is maximized with optimum piping diameter & smooth & tapered curves. This design increases the air intake breathing capabilities dramatically. In addition, the aluminium molded piping will not deformed at high boost levels (where a huge air vacuum occured inside the air intake piping) as compared to the stock rubber intake piping. The Super Suction Kit is an intake adapter kit for hardcore enthusiasts wishing to convert their fuel injection system to D-Jetro (Pressure sensor type) or switch airflow meters with a higher capacity version from a different vehicle. This allows tuners to transcend the limitations of the factory fuel injection system and unleash the true power potential of their modified engine. The kit comes with a replacement intake pipe, filter, airflow meter and all necessary hardware. Available for: 538-M010 - Mitsubishi CP9A 4G63 (01/99-02/01) - EVO 5 CP9A - EVO 6 CP9A CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$670.00 (+ postage: $40.00) | ||||
| APEXi SUPER SUCTION KIT - 80mm (Z32 AFM) | .jpg) | |||
The Super Suction kit from APEXi reduces the suction resistance from the air filter to the turbocharger. This suction reduction also maximize turbine efficiency 100% and from the filter intake is maximized with optimum piping diameter & smooth & tapered curves. This design increases the air intake breathing capabilities dramatically. In addition, the aluminium molded piping will not deformed at high boost levels (where a huge air vacuum occured inside the air intake piping) as compared to the stock rubber intake piping. The Super Suction Kit is an intake adapter kit for hardcore enthusiasts wishing to convert their fuel injection system to D-Jetro (Pressure sensor type) or switch airflow meters with a higher capacity version from a different vehicle. This allows tuners to transcend the limitations of the factory fuel injection system and unleash the true power potential of their modified engine. The kit comes with a replacement intake pipe, filter, and all necessary hardware. Available for: 538-N011 - Nissan PS13/RPS13 SR20DET (01/91-01/99) - Silvia PS13 (Red Top) - 180SX RPS13 (Red & black top) 538-N021 - Nissan S14/CS14/S15 SR20DET (93/10-) - Silvia S14 - Silvia S15 CLICK HERE FOR BANK DEPOSIT OR MONEY ORDER | ||||
$590.00 (+ postage: $30.00) | ||||
| APEXi SUPER SUCTION KIT - 80mm (Z32 AFM) - GTR | ||||
The Super Suction kit from APEXi reduces the suction resistance from the air filter to the turbocharger. This suction reduction also maximize turbine efficiency 100% and from the filter intake is maximized with optimum piping diameter & smooth & tapered curves. This design increases the air intake breathing capabilities dramatically. In addition, the aluminium molded piping will not deformed at high boost levels (where a huge air vacuum occured inside the air intake piping) as compared to the stock rubber intake piping. The Super Suction Kit is an intake adapter kit for hardcore enthusiasts wishing to convert their fuel injection system to D-Jetro (Pressure sensor type) or switch airflow meters with a higher capacity version from a different vehicle. This allows tuners to transcend the limitations of the factory fuel injection system and unleash the true power potential of their modified engine. The kit comes with a replacement intake pipe, filter, and all necessary hardware. Available for: 538-N051 - R32 GTR - BNR32 (08/89-01/95)Skyline 538-N061 - R33 GTR - BCNR33 (01/95-01/99) | ||||
$690.00 (+ postage: $40.00) | ||||
